Kelon Washing Machines Repair - Red Sea - Hurghada

Troubleshooting Guide for Common Kelon Washing Machine Issues

Kelon washing machines are advanced appliances, but continuous usage can lead to common operational issues. Here is how to diagnose and resolve them in Hurghada:

• Water Not Draining (Drain Pump Malfunction): If your washer is not draining, it could be due to a clogged drain hose or a faulty drain pump. We recommend checking the washing machine filter at the bottom of the device and removing any coins or debris.
• Severe Vibration/Noise During Spin Cycle: This is often caused by an unlevel machine, faulty shock absorbers, or an overloaded drum. Ensure the washer is placed on a flat surface and distribute the clothes evenly.
• Washing Machine Won't Start (Door Lock Issue): If the machine won't start despite being plugged in, the door switch/lock might be faulty. Ensure the door is tightly closed, or replace the damaged switch to allow the machine to start safely.
• Water Not Entering the Machine: Check the water inlet valve, ensure that the water source is fully open, and verify that the hose filter is clean and free of sediment.

Tips to Maintain Kelon Washer Efficiency and Lifespan

To get the best performance from your washer and prevent sudden breakdowns, follow these guidelines in Hurghada:

1. Monthly Vinegar Clean Cycle: Run a full cycle with hot water and a cup of vinegar on an empty machine to clean internal parts from scale and detergent buildup.
2. Do Not Overload the Drum: Avoid filling the drum excessively. Leaving enough space for clothes to move protects the motor and shock absorbers from premature wear.
3. Use the Correct Detergent: Use low-suds detergent designated for automatic washers to prevent excessive foam that can damage electronic circuits and the main board.
4. Aerate the Washer After Wash: Leave the washer door slightly open for an hour after each use to prevent mold growth and bad odors.