Kelvinator Cookers Repair - Alexandria - Borg El Arab

Troubleshooting Guide for Common Kelvinator Cooker Issues

Your Kelvinator cooker is essential for daily cooking. Learn about common issues and how to manage them safely:

• Weak or Yellow Burner Flame: This usually happens due to burner nozzles (jets) clogged with grease and burnt food residues, or incorrect air-to-gas mixing. The nozzles need to be cleared or replaced.
• Oven Flame Goes Out After Releasing the Knob: Modern cookers have a safety valve (thermocouple). If this sensor is dirty, misaligned, or faulty, it cuts off gas flow for safety. The thermocouple must be checked and replaced if necessary.
• Auto-Ignition Failing: If the ignition spark is missing, it could be due to moisture on the burner, grease accumulation around the spark plug, or a faulty ignition transformer.
• Stiff or Hard-to-Turn Control Knobs: This is caused by grease getting inside the valve mechanism. The valves must be cleaned and lubricated with high-temperature grease.

Tips to Keep Your Kelvinator Cooker Clean and Safe

Maintain the safety and performance of your Kelvinator cooker with these preventive steps:

1. Daily Grease Cleaning: Wipe down the surface and burners after cooking to remove oil residues before they burn and clog the nozzles.
2. Avoid Using Aluminum Foil on the Surface: Placing foil directly on the cooker top blocks proper ventilation and can damage the knobs and enamel.
3. Clean Oven Glass Gently: Avoid spraying cold water on the oven glass when it is hot to prevent it from cracking or breaking suddenly.
4. Inspect Gas Hose and Regulator: Regularly check the gas hose for cracks and replace the pressure regulator every two years to ensure stable, safe gas pressure.