Kelvinator Refrigerators Repair - Luxor - Esna

Troubleshooting Guide for Common Kelvinator Refrigerator Issues

Your Kelvinator refrigerator is the heart of your kitchen. Here is a guide to help you identify common cooling problems and fix them:

• Poor Cooling in Refrigerator or Freezer: This is often caused by ice accumulation on the evaporator coils due to a faulty no-frost heater, defroster timer, or distribution fan. The no-frost system must be inspected and faulty parts replaced.
• Water Leakage Inside or Under the Fridge: This happens due to a clogged defrost drain hole or hose. You can carefully clean the drain hole to restore the normal water flow to the evaporation pan above the compressor.
• Compressor Running Continuously Without Stopping: If your Kelvinator fridge doesn't shut off, the door gasket might be worn out, letting warm air leak inside, or the thermostat might be faulty.
• Loud Vibrating Noise: Ensure the refrigerator is level and not touching adjacent walls. The rear evaporation pan might be loose, or the compressor's rubber mounts could be worn out.

Tips to Maintain Kelvinator Refrigerator Efficiency and Lifespan

Follow these simple tips to ensure your Kelvinator refrigerator works at peak efficiency and reduces electricity consumption:

1. Keep Proper Ventilation Space: Ensure there is a gap of at least 10-15 cm behind and on both sides of the refrigerator to guarantee adequate ventilation for the condenser coils.
2. Inspect and Clean Door Gaskets: Check that the magnetic door seals are clean and free of food debris to ensure a tight seal and prevent cold air from escaping.
3. Avoid Placing Hot Food Inside: Wait for food to cool down completely before placing it in the fridge to avoid increasing the workload on the compressor.
4. Periodic Defrosting and Cleaning: Unplug the fridge and clean the shelves and drawers with warm water and baking soda every 3 months to eliminate bad odors.